Someone needs to have a look at this. The roads need widening, or some of the barriers need removing. I cannot get into the port with a trailer. I can't even get in with a SMALL trailer. There's too much road furniture/cones etc.
Hopefully this gets fixed soon.
Plymouth ferry entry
Forum rules
ALWAYS FOLLOW OUR SELF-HELP GUIDE FIRST.
If you report a game crash ALWAYS post your game.log.txt in between CODE tags, or if it too large post it on pastebin.com and share the link.
ALWAYS FOLLOW OUR SELF-HELP GUIDE FIRST.
If you report a game crash ALWAYS post your game.log.txt in between CODE tags, or if it too large post it on pastebin.com and share the link.
-
citelis730
- Posts: 1197
- Joined: 20 Dec 2017 13:14
- Donation rank:
Yes it's known that entering Plymouth ferry is extremely difficult (almost impossible) with a normal trailer. Developer will review it.
-
JoeyaoChou
- Posts: 3
- Joined: 27 Nov 2020 15:24
The most annoying part is that Plymouth port sets too much road blockers.
It force you take the left lane, and then force you switch to the right lane.
It is almost like a moose test, while the subject is not a sedan, but a truck with trailer.
Also the crew of the port treat death as home, they stands just at the lane line.
I know in ProMods truck and human can overlay, but it is not the way it should be.
It tooks me 30 to 40 min to inch into the ferry with lowboy (low-loader).
It force you take the left lane, and then force you switch to the right lane.
It is almost like a moose test, while the subject is not a sedan, but a truck with trailer.
Also the crew of the port treat death as home, they stands just at the lane line.
I know in ProMods truck and human can overlay, but it is not the way it should be.
It tooks me 30 to 40 min to inch into the ferry with lowboy (low-loader).
- ets2_20211102_232422_00.png (2.34 MiB) Viewed 110 times
- ets2_20211102_234512_00.png (1.84 MiB) Viewed 110 times
- ets2_20211102_234730_00.png (1.79 MiB) Viewed 110 times
Last edited by JoeyaoChou on 02 Nov 2021 17:37, edited 1 time in total.
-
bustruckersteve
- Posts: 2
- Joined: 20 Jul 2019 15:31
- Donation rank:
- Contact:
I did find it confusing getting to the ship, however I found my way onto the ferry without any manouvering problems or obstacles. Coming off the ferry is also confusing at Plymouth. You turn right and wait for the gate to open then proceed straight on...but do not take the right lane through the Xray, you will not get through the barrier at the end onto the road without problems as only the left side barrier raises.
Just to say what a fabulous job you guys do at ProMods and all the amazing work you do!
The following is just observation, not criticism:
Took me 40 minutes to inch my way onto the ferry at Plymouth today.
I would have thought that removing the bus at the entrance to the port, or allowing the rh barrier to open would help.
Also maybe remove some of the cones just before the ship entry.
My truck was facing inward once I got to Bilbao, but fortunately the damage picked up in getting into the ferry at Plymouth meant I could call for a tow to repairs!
The following is just observation, not criticism:
Took me 40 minutes to inch my way onto the ferry at Plymouth today.
I would have thought that removing the bus at the entrance to the port, or allowing the rh barrier to open would help.
Also maybe remove some of the cones just before the ship entry.
My truck was facing inward once I got to Bilbao, but fortunately the damage picked up in getting into the ferry at Plymouth meant I could call for a tow to repairs!
-
- Information
-
Who is online
Users browsing this forum: No registered users and 1 guest