Game stops and crashes without error message 2

[WolfieJones]

Has this been solved yet? I'm getting the same problem near Augustow.

[Trucker2223]

Post your game.log otherwise nobody can help

[WolfieJones]

I got it here:

[JayCetic]

Hi,

Looks like your hardware might not be enough to handle ProMods. You only have the minimum hardware to run Euro Truck Simulator 2.

"AMD A8-5600K APU with Radeon(tm) HD Graphics ] with 2 cores (4 threads)"
"AMD Radeon R7 200 Series (22.19.162.4) [2029 MB]"

[WolfieJones]

I see. But I have been using ProMods for quite a few months now, and in the previous version I was always successfully able to pass through and visit Augustow. Could it be a road connector problem?

[JayCetic]

One way to check is to remove all the mods except Promods, then add one map mod at a time on top of ProMods to see if it's causing the issue. If for some reason, the road connector should cause the problem, you can check with author of that mod to see if they have an updated version.

[WolfieJones]

I will try your suggestion. I had the idea of the road connector causing the problem since I've been using an outdated version for some time now.

[WolfieJones]

Update: Apparently, updating the road connection didn't work. Augustow doesn't appear on the map and Brandenburg seems to be broken too.

[Shiva]

Where is your road connections between ProMods and RusMap, you have none!
Either get the 1 done by ProMods from here https://promods.net/viewtopic.php?f=42&t=35575
Or get the RusMap done from https://promods.net/viewtopic.php?f=42&t=10186

And I am not sure your total load order is correct either.
https://promods.net/viewtopic.php?f=42&t=29618

[WolfieJones]

I currently use the road connector made by Arayas on the RoExtended site, the same one Wombat Trucker uses. I also use the same load order he uses.