Can´t connect road to prefab
First of all, you need to change the origin (red dot) on the prefab! Looks like you have set it to 1, and that will not work when you are going to connect the two other roads (because two red dots can't connect).
For a prefab like that, I would set the origin to 0. Then it will be a red/green dot connection. If you then have trouble with connecting them, try hold the 'Alt' key when connecting. That should do it.
For a prefab like that, I would set the origin to 0. Then it will be a red/green dot connection. If you then have trouble with connecting them, try hold the 'Alt' key when connecting. That should do it.
ATS Map Designer, SCS Software
From Denmark, living in the Czech Republic!
Keep calm and ride the dirt!
"Kan man gå overhovedet i sådan nogle?" -Jørgen Leth
From Denmark, living in the Czech Republic!
Keep calm and ride the dirt!
"Kan man gå overhovedet i sådan nogle?" -Jørgen Leth
-
- Posts: 68
- Joined: 17 Nov 2014 20:03
- Donation rank:
Are the road and prefab nodes at the same height?
- Noah_Lukas
- Posts: 2680
- Joined: 02 Aug 2015 11:46
- Location: Karlsruhe, Baden-Württemberg, Germany
- Contact:
Already tried the other way round: to connect the road to the prefab with pressing there alt as well?
Developer for Germany and France
Regional Coordinator for the Central Region
Regional Coordinator for the Central Region
-
- Information
-
Who is online
Users browsing this forum: No registered users and 11 guests