Hello, I'm new on editing ETS2 and i want to know how to add semaphore?
When I put on the road the light are white
Someone, can help me ?
Question about traffic lights (semaphores)
Its easy,just click on red node of prefab (with item properties ON )Check use semaphores,and,u are done!Xaos wrote:Hello, I'm new on editing ETS2 and i want to know how to add semaphore?
When I put on the road the light are white
Someone, can help me ?
Developing an addon for ProMods! Find it here: viewtopic.php?f=37&t=28921
- MandelSoft
- Lead Developer
- Posts: 3835
- Joined: 08 Aug 2013 10:48
- Location: Delft [NL]
What type do you mean? Country or setup?
Your daily dose of wisdom!
╔═══╗────╔═╗╔═╗────╔╗
║╔═╗║────║║╚╝║║────║║
║╚═╝╠═╦══╣╔╗╔╗╠══╦═╝╠══╗
║╔══╣╔╣╔╗║║║║║║╔╗║╔╗║══╣
║║──║║║╚╝║║║║║║╚╝║╚╝╠══║
╚╝──╚╝╚══╩╝╚╝╚╩══╩══╩══╝
Don't ask us for a release date; we don't know either.
╔═══╗────╔═╗╔═╗────╔╗
║╔═╗║────║║╚╝║║────║║
║╚═╝╠═╦══╣╔╗╔╗╠══╦═╝╠══╗
║╔══╣╔╣╔╗║║║║║║╔╗║╔╗║══╣
║║──║║║╚╝║║║║║║╚╝║╚╝╠══║
╚╝──╚╝╚══╩╝╚╝╚╩══╩══╩══╝
Don't ask us for a release date; we don't know either.
Both. As you can see https://i.hizliresim.com/6mRZ1k.png when I activate semaphore, I only see this type of signal.MandelSoft wrote:What type do you mean? Country or setup?
- MandelSoft
- Lead Developer
- Posts: 3835
- Joined: 08 Aug 2013 10:48
- Location: Delft [NL]
That's the default signal model. Traffic lights are directly assigned to countries, so if the prefab nodes are assigned to i.e. Germany, it will get German signals, if available. If not, it will keep on using the default signals. The signal models are defined in "/def/world/semaphore_model.sii". The item name is structured in such a way that you have the item type first, then the signal type and then the country code it is used for. Example, this is the definition for Slovenia (slo):
So you need to model those, but this can be a bit tricky if you don't know how the traffic light lamp overlays work. They use some very specific UV system, so stick to that.
If you want to change the setup itself, you have to change the prefab, which is a whole lot more complicated and I'm not going to explain it, since it requires you to know how to model in ZModeler first...
Code: Select all
tr_semaphore_model : tr_sem_mdl.city.slo {
name: "city-slo"
model_desc: "/model/traffic_light/slovenia/city_slo.pmd"
model_coll: "/model/traffic_light/slovenia/city_slo.pmc"
dynamic: false
}
tr_semaphore_model : tr_sem_mdl.single.slo {
name: "single-slo"
model_desc: "/model/traffic_light/slovenia/single_slo.pmd"
model_coll: "/model/traffic_light/slovenia/single_slo.pmc"
dynamic: false
}
If you want to change the setup itself, you have to change the prefab, which is a whole lot more complicated and I'm not going to explain it, since it requires you to know how to model in ZModeler first...
Your daily dose of wisdom!
╔═══╗────╔═╗╔═╗────╔╗
║╔═╗║────║║╚╝║║────║║
║╚═╝╠═╦══╣╔╗╔╗╠══╦═╝╠══╗
║╔══╣╔╣╔╗║║║║║║╔╗║╔╗║══╣
║║──║║║╚╝║║║║║║╚╝║╚╝╠══║
╚╝──╚╝╚══╩╝╚╝╚╩══╩══╩══╝
Don't ask us for a release date; we don't know either.
╔═══╗────╔═╗╔═╗────╔╗
║╔═╗║────║║╚╝║║────║║
║╚═╝╠═╦══╣╔╗╔╗╠══╦═╝╠══╗
║╔══╣╔╣╔╗║║║║║║╔╗║╔╗║══╣
║║──║║║╚╝║║║║║║╚╝║╚╝╠══║
╚╝──╚╝╚══╩╝╚╝╚╩══╩══╩══╝
Don't ask us for a release date; we don't know either.
More than 2 years ago. This topic saved me while I was working on my own South Bulgaria-Turkey project. Now, 2 years later it again saved me on a completely different project. Thank you Mandelsoft and Promods and thank you SCS for not changing its file structure
-
- Information
-
Who is online
Users browsing this forum: No registered users and 9 guests