Invisible wall on 24 between Hamburg-Berlin[SOLVED]

[abasstreppas]

I hit a invisible wall It have been reproduced

Code: Select all

4966.22;25.013;-15002.6

[ScuL]

Ehm hmmmm.. we have not touched that area of road at all.

Is this v1.01?

[abasstreppas]

Yep. I thought it was strange too but I would be surprised if it is in SCS-map too, as it probably should have been known by now. Maybe I should try to reproduce it again and also without your map. I only went back to an earlier save when reproducing it and it could happend be just a one-of-a-kind bug.

I'll be back

[abasstreppas]

I'll be damned On my way back on the same road, but now going in the opposite direction, it happend again. This time though closer to Berlin. In both cases the "wall" was in the inner lane and also Ai's has no problem passing through. I have to mention that I also using the DK18/A18-map too, if that could be the case (but that is just a small part in Poland )

Code: Select all

6825.71;20.4294;-13876.9

[busterbrown]

Don't know but I think it's either that DK18/A18-map, or your computer components. I've been both ways on 24 today Sept/2nd/2013 from Hamburg to Berlin and no problems. After I completed that I got a load from Berlin to Heliski ( however it's spelled ) in Finland. Hence the red line.


Click on pic to inlarge.

I think I'd drop the DK18/A18-map as ProMods Scandinavia Mod is kind of fussy.

Hope you get it going ok.

EDIT: I'm running ProMods v1.01 map.

EDIT: I should of remembered what Scul just said in upper post that they had nothing to do with this part of map.
So, delete the DK18/A18-map and see what happens. I may be wrong but I doubt if any non SCS/ProMod ETS2 map is going to work correctly. I can just imagine that invisible wall at about 80/90 KPH..........OUCH!


Anyway good luck.

[ScuL]

Seeing as you are using another map extension it could well be that this invisible wall occurs at the border of the sector.

There is a bug in the sector system when combining maps that have been based on a different base map;
for instance our map was based on 1.2.5 and later merged with 1.4.1
if you merge with a map on 1.3.x you will get different road numbers and the border of the sectors will get a negative node (-1).
it's quite likely that the negative node will create an invisible wall.

Let us know what happens if you test it without the map-mod.

[abasstreppas]

Solved It was this mod MandelSoft's Minor Mod Pack v0.1 that caused the problem. I'll link to this thread and a note on SCS forum were MandelSoft published the mod, just to see if he can solve it

[MandelSoft]

That's weird, my minor mod pack doesn't contain any map changes, only prop overrides for props. It may be the sign, but then again, I should've noticed it on other points on the map too, since it's a general override. But so far, this only seems to be the case with the A24...

But I must say, I've ran into the same problem on the A24, but on a different location, coming from Berlin, though this wall was only on the outer lane. I could pass it while being on the inner lanes though...

[abasstreppas]

Yeah, it is strange indeed. Personally I can live with it as it only affect the inner lane. I just have to remember...

[ScuL]

Could be you forgot a collision model?