Hey guys,
For some time now, I've been having trouble with my steering on all trucks. The problem occurs when I try to haul locomotives or anything over 40t. I have JazzyCat's Trailers and Cargo, Railroad and Military trailers. Can someone help me with this issue? I've even used the American trucks with much issue. Any corner requires a back and forth turn. Pulling is not an issue. Turning the wheel all the way left or right and still forward. The only way to turn is to back up and go forward, and so on. Please help. I have no idea what to do. I'm very new to mods and have no idea what I'm doing. Any and all help appreciated.
Steering
You have that kind of chassis configuration that makes you truck to do a wheelie.
You may want 6x2 midlift or 6x2 taglift chassis.
You may want 6x2 midlift or 6x2 taglift chassis.
-
- Posts: 10
- Joined: 04 Apr 2015 01:39
ok, thx. I'll give that a try. I appreciate you answering.
I was just about to open the same thread.
I have this issue too. But with 6x4 chassis as well.
The trailer was from the agricultural pack and weighed about 23to.
Impossible that you need a 8x4 to tow a 23to trailer.
As I don't know how these trailers are made and if you can or have to indicate a center of mass,
it is possible that too much weight is shifted onto the truck.
I have this issue too. But with 6x4 chassis as well.
The trailer was from the agricultural pack and weighed about 23to.
Impossible that you need a 8x4 to tow a 23to trailer.
As I don't know how these trailers are made and if you can or have to indicate a center of mass,
it is possible that too much weight is shifted onto the truck.
-
- Information
-
Who is online
Users browsing this forum: No registered users and 39 guests